Florida · 2026 cost guide
How much does a concrete driveway cost in Florida?
In Florida, a concrete driveway costs about $2,900–$8,300 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly $4.9–$13.72 per square foot. That’s close to the U.S. average.
Estimate your Florida project with the Concrete Calculator →
Florida cost breakdown
| Typical total (a 600 sq ft (20×30) 4-inch-thick concrete driveway) | $2,900–$8,300 |
| Per square foot | $4.9–$13.72 |
| Metro areas (Miami, Tampa, and Orlando) | up to ~$9,000 |
| Versus U.S. average | close to average |
What’s different about Florida
Florida's hurricane building codes require wind-rated materials and tighter inspections, and coastal humidity pushes up exterior maintenance costs.
- Coastal wind codes can require stronger materials and fastening.
- Humidity favors moisture- and mildew-resistant materials.
- Salt air favors corrosion-resistant materials and fasteners.
Expect quotes toward the higher end in Florida’s larger metros — Miami, Tampa, and Orlando — where labor and permit costs run above the state average, and lower in rural areas.
How the cost is built
Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.
Frequently asked questions
How much does a concrete driveway cost in Florida?
In Florida, a concrete driveway costs about $2,900 to $8,300 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 4.9–13.72 per square foot. That's close to the national average, reflecting local labor and material costs.
What affects the cost of a concrete driveway in Florida?
Florida's hurricane building codes require wind-rated materials and tighter inspections, and coastal humidity pushes up exterior maintenance costs. Coastal wind codes can require stronger materials and fastening.
How can I get an accurate concrete driveway estimate for my home?
Use the free Concrete Calculator to plug in your real measurements and materials, then collect two or three local quotes to compare. Within Florida, prices run higher in metros like Miami, Tampa, and Orlando and lower in rural areas.
Concrete driveway cost by city in Florida
Concrete driveway cost in nearby states
Keep planning
Related calculators
Estimate gallons of paint for walls and ceilings from room size, coats, and openings.
Open calculator →ConstructionDrywall CalculatorEstimate sheets of drywall plus screws, joint compound, and tape from your wall area.
Open calculator →ConstructionMulch & Gravel CalculatorCalculate cubic yards and bags of mulch, gravel, or topsoil for any bed depth.
Open calculator →Sources & method
The Florida figure is the national installed-cost range scaled by a Florida regional cost index (its construction costs run close to the U.S. average), then adjusted for the local climate and code factors above. It’s a 2026 planning estimate, not a quote — get local bids before budgeting.
- Smart Cost Hub methodology — how our cost ranges and indices are built
- U.S. Bureau of Labor Statistics — Producer Price Index (construction materials)