Maryland · 2026 cost guide
How much does a concrete driveway cost in Maryland?
In Maryland, a concrete driveway costs about $3,400–$9,500 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly $5.6–$15.68 per square foot. That’s about 12% above the U.S. average.
Estimate your Maryland project with the Concrete Calculator →
Maryland cost breakdown
| Typical total (a 600 sq ft (20×30) 4-inch-thick concrete driveway) | $3,400–$9,500 |
| Per square foot | $5.6–$15.68 |
| Metro areas (Baltimore, Columbia, and Silver Spring) | up to ~$10,500 |
| Versus U.S. average | about 12% above average |
What’s different about Maryland
Maryland's humid mid-Atlantic climate and higher labor and permit costs near the D.C. corridor push exterior projects above the national average.
- Humidity favors moisture- and mildew-resistant materials.
- Permit fees and skilled-trade labor rates here run well above the national average — usually the single biggest cost driver.
Expect quotes toward the higher end in Maryland’s larger metros — Baltimore, Columbia, and Silver Spring — where labor and permit costs run above the state average, and lower in rural areas.
How the cost is built
Concrete driveway cost depends on square footage, slab thickness, and finish — a plain broom finish is cheapest, while stamped or colored concrete costs more. Site prep, removal of an old slab, reinforcement, and thicker pours for heavy vehicles add to the total.
Frequently asked questions
How much does a concrete driveway cost in Maryland?
In Maryland, a concrete driveway costs about $3,400 to $9,500 in 2026 for a 600 sq ft (20×30) 4-inch-thick concrete driveway — roughly 5.6–15.68 per square foot. That's about 12% above the national average, reflecting local labor and material costs.
What affects the cost of a concrete driveway in Maryland?
Maryland's humid mid-Atlantic climate and higher labor and permit costs near the D.C. corridor push exterior projects above the national average. Humidity favors moisture- and mildew-resistant materials.
How can I get an accurate concrete driveway estimate for my home?
Use the free Concrete Calculator to plug in your real measurements and materials, then collect two or three local quotes to compare. Within Maryland, prices run higher in metros like Baltimore, Columbia, and Silver Spring and lower in rural areas.
Concrete driveway cost by city in Maryland
Concrete driveway cost in nearby states
Keep planning
Related calculators
Estimate gallons of paint for walls and ceilings from room size, coats, and openings.
Open calculator →ConstructionDrywall CalculatorEstimate sheets of drywall plus screws, joint compound, and tape from your wall area.
Open calculator →ConstructionMulch & Gravel CalculatorCalculate cubic yards and bags of mulch, gravel, or topsoil for any bed depth.
Open calculator →Sources & method
The Maryland figure is the national installed-cost range scaled by a Maryland regional cost index (its construction costs run about 12% above the U.S. average), then adjusted for the local climate and code factors above. It’s a 2026 planning estimate, not a quote — get local bids before budgeting.
- Smart Cost Hub methodology — how our cost ranges and indices are built
- U.S. Bureau of Labor Statistics — Producer Price Index (construction materials)